Missing Link in ENTERPRISE NETWORKING















CCNA Online Training

This is our premium online offering. The instructor will exclusively teach Online Premium students in a live Webex session. Course times are optimised for students from the USA, Europe, Australia and the Middle East. Online lab access is available to practice exercises and instructor will be on hand to help students through the exercises. Course timings and content can also be customised as per requirements (charges extra).

Buy Now: $ 1,000

CCNA v3 Certification

CCNA Certification Introduction

The CCNA (Cisco Certified Network Associate) certification is the first in Cisco´s line of certifications that an aspiring networking professional must acquire in order to add value to their IT career. The CCNA certification validates a firm foundation of networking skills that include fundamentals like the OSI Reference Model, Networking Protocols, Layer 2 Switching Concepts and Protocols, Routing Concepts and Protocols, and Wide-Area Networking (WAN) Connectivity. Thus a person who is aiming to qualify for the CCNA certification should be proficient in their abilities to provide basic network installations and troubleshooting.

CCNA Training Details:

Skills and knowledge gained through the CCNA training are valuable in the networking field as the topics covered during the CCNA training program provide the basis for all networking topologies and protocols.

Over the last many years Zoom Technologies has successfully trained several thousands of networking professionals who have qualified the CISCO CCNA certification exam.

The CCNA training covers all aspects of the 200-125 curriculum in detail. The course also provides practical hands-on training on Cisco Routers and Cisco Switches, as no WAN setup is complete without Leased line / Wireless / VSAT / DSL etc. Telecom devices like CSU/DSU, Telco MUX, are also covered in the Practical setup. The training for CCNA Certification is provided by Senior Network/WAN engineers who have several years of field experience.

Students preparing for the CCNA certification have a choice of writing the CCNA exam as a single paper or as two papers together. The details of paper codes and their descriptions are mentioned in the table below.

Cisco CCNA v3 Course Details

Cisco Certified Network Associate (Exam : 200-125)

  1. Network Fundamentals
    • Compare and contrast OSI and TCP/IP models
    • Compare and contrast TCP and UDP protocols
    • Describe the impact of infrastructure components in an enterprise network
      • Firewalls
      • Access points
      • Wireless controllers
    • Describe the effects of cloud resources on enterprise network architecture
      • Traffic path to internal and external cloud services
      • Virtual services
      • Basic virtual network infrastructure
    • Compare and contrast collapsed core and three-tier architectures
    • Compare and contrast network topologies
      • Star
      • Mesh
      • Hybrid
    • Select the appropriate cabling type based on implementation requirements
    • Apply troubleshooting methodologies to resolve problems
      • Perform and document fault isolation
      • Resolve or escalate
      • Verify and monitor resolution
    • Configure, verify, and troubleshoot IPv4 addressing and subnetting
    • Compare and contrast IPv4 address types
      • Unicast
      • Broadcast
      • Multicast
    • Describe the need for private IPv4 addressing
    • Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
    • Configure, verify, and troubleshoot IPv6 addressing
    • Configure and verify IPv6 Stateless Address Auto Configuration
    • Compare and contrast IPv6 address types
      • Global unicast
      • Unique local
      • ink local
      • Multicast
      • Modified EUI 64
      • Autoconfiguration
      • Anycast
  1. LAN Switching Technologies
    • Describe and verify switching concepts
      • MAC learning and aging
      • Frame switching
      • Frame flooding
      • MAC address table
    • Interpret Ethernet frame format
    • Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
    • Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
      • Access ports (data and voice)
      • Default VLAN
    • Configure, verify, and troubleshoot inters witch connectivity
      • Trunk ports
      • Add and remove VLANs on a trunk
      • DTP, VTP (v1&v2), and 802.1Q
      • Native VLAN
    • Configure, verify, and troubleshoot STP protocols
      • STP mode (PVST+ and RPVST+)
      • STP root bridge selection
    • Configure, verify and troubleshoot STP related optional features
      • Port Fast
      • BPDU guard
    • Configure and verify Layer 2 protocols
      • Cisco Discovery Protocol
      • LLDP
    • Configure, verify, and troubleshoot (Layer 2/Layer 3) Ether Channel
      • Static
      • PAGP
      • LACP
    • Describe the benefits of switch stacking and chassis aggregation
  1. Routing Technologies
    • Describe the routing concepts
      • Packet handling along the path through a network
      • Forwarding decision based on route lookup
      • Frame rewrite
    • Interpret the components of a routing table
      • Prefix
      • Network mask
      • Next hop
      • Routing protocol code
      • Administrative distance
      • Metric
      • Gateway of last resort
    • Describe how a routing table is populated by different routing information sources
      • Admin distance
    • Configure, verify, and troubleshoot inter-VLAN routing
      • Router on a stick
      • SVI
    • Compare and contrast static routing and dynamic routing
    • Compare and contrast distance vector and link state routing protocols
    • Compare and contrast interior and exterior routing protocols
    • Configure, verify, and troubleshoot IPv4 and IPv6 static routing
      • Default route
      • Network route
      • Host route
      • Floating static
    • Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4(excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
    • Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6(excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
    • Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
    • Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)
    • Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)
    • Troubleshoot basic Layer 3 end-to-end connectivity issues
  1. WAN Technologies
    • Configure and verify PPP and MLPPP on WAN interfaces using local authentication
    • Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
    • Configure, verify, and troubleshoot GRE tunnel connectivity
    • Describe WAN topology options
      • Point-to-point
      • Hub and spoke
      • Full mesh
      • Single vs dual-homed
    • Describe WAN access connectivity options
      • MPLS
      • Metro Ethernet
      • Broadband PPPoE
      • Internet VPN (DMVPN, site-to-site VPN, client VPN)
    • Configure and verify single-homed branch connectivity using eBGP IPv4 (limited topeering and route advertisement using Network command only)
    • Describe basic QoS concepts
      • Marking
      • Device trust
      • Prioritization
        • Voice
        • Video
        • Data
    • Shaping
    • Policing
    • Congestion management
  1. Infrastructure Services
    • Describe DNS lookup operation
    • Troubleshoot client connectivity issues involving DNS
    • Configure and verify DHCP on a router (excluding static reservations)
      • Server
      • Relay
      • Client
      • TFTP, DNS, and gateway options
    • Troubleshoot client- and router-based DHCP connectivity issues
    • Configure, verify, and troubleshoot basic HSRP
      • Priority
      • Preemption
      • Version
    • Configure, verify, and troubleshoot inside source NAT
      • Static
      • Pool
      • PAT
    • Configure and verify NTP operating in a client/server mode
  1. Infrastructure Security
    • Configure, verify, and troubleshoot port security
      • Static
      • Dynamic
      • Sticky
      • Max MAC addresses
      • Violation actions
      • Err-disable recovery
    • Describe common access layer threat mitigation techniques
      • 1x
      • DHCP snooping
      • Nondefault native VLAN
    • Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
      • Standard
      • Extended
      • Named
    • Verify ACLs using the APIC-EM Path Trace ACL Analysis tool
    • Configure, verify, and troubleshoot basic device hardening
      • Local authentication
      • Secure password
      • Access to device
        • Source address
        • Telnet/SSH
      • Login banner
    • Describe device security using AAA with TACACS+ and RADIUS
  1. Infrastructure Management
    • Configure and verify device-monitoring protocols
      • SNMPv2
      • SNMPv3
      • Syslog
    • Troubleshoot network connectivity issues using ICMP echo-based IP SLA
    • Configure and verify device management
      • Backup and restore device configuration
      • Using Cisco Discovery Protocol or LLDP for device discovery
      • Licensing
      • Logging
      • Timezone
      • Loopback
    • Configure and verify initial device configuration
    • Perform device maintenance
      • Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
      • Password recovery and configuration register
      • File system management
    • Use Cisco IOS tools to troubleshoot and resolve problems
      • Ping and trace route with extended option
      • Terminal monitor
      • Log events
      • Local SPAN
    • Describe network programmability in enterprise network architecture
      • Function of a controller
      • Separation of control plane and data plane
      • Northbound and southbound APIs

Course Duration: 1 Month (40 Hours)

Course Schedule

Month Batch Date and Timings
According to Different Time Zone
Course fee in USD + Taxes Extra
June
Hyderabad, India
GMT +5.5
6:00 AM
15 June
Los Angeles, USA
GMT -7
5:30 PM
14 June
New York, USA
GMT -4
8:30 PM
14 June
London, UK
GMT +1
1:30 AM
15 June
Dubai, UAE
GMT +4
4:30 AM
15 June
Perth, Australia
GMT +8
8:30 AM
15 June
Sydney, Australia
GMT +10
10:30 AM
15 June
July
Hyderabad, India
GMT +5.5
11:00 PM
15 July
Los Angeles, USA
GMT -7
10:30 AM
15 July
New York, USA
GMT -4
1:30 PM
15 July
London, UK
GMT +1
6:30 PM
15 July
Dubai, UAE
GMT +4
9:30 PM
15 July
Perth, Australia
GMT +8
1:30 AM
16 July
Sydney, Australia
GMT +10
3:30 AM
16 July
August
Hyderabad, India
GMT +5.5
6:00 AM
15 August
Los Angeles, USA
GMT -7
5:30 PM
14 August
New York, USA
GMT -4
8:30 PM
14 August
London, UK
GMT +1
1:30 AM
15 August
Dubai, UAE
GMT +4
4:30 AM
15 August
Perth, Australia
GMT +8
8:30 AM
15 August
Sydney, Australia
GMT +10
10:30 AM
15 August



Copyright 1996 - 2017 ZOOM Technologies. All rights reserved.