ZOOM Technologies Missing Link in ENTERPRISE NETWORKING

CCNA + CISCO Security Package

* All prices are subject to a 18% Goods and Service Tax Charge. For online Credit / Debit Card payment, surcharge 5.75% is charged to the Course fee. Rate quoted in U.S. dollars subject to change according to Foreign Exchange rates.

Course Details

CCNA + CISCO Security Package

(CCNA + CISCO Security)

CCNA Course details in PDF

CCNA v3 Certification

CCNA Certification Introduction:

The CCNA (Cisco Certified Network Associate) certification is the first in Cisco´s line of certifications that an aspiring networking professional must acquire in order to add value to their IT career. The CCNA certification validates a firm foundation of networking skills that include fundamentals like the OSI Reference Model, Networking Protocols, Layer 2 Switching Concepts and Protocols, Routing Concepts and Protocols, and Wide-Area Networking (WAN) Connectivity. Thus a person who is aiming to qualify for the CCNA certification should be proficient in their abilities to provide basic network installations and troubleshooting.

CCNA Training Details:

Skills and knowledge gained through the CCNA training are valuable in the networking field as the topics covered during the CCNA training program provide the basis for all networking topologies and protocols.

Over the last many years Zoom Technologies has successfully trained several thousands of networking professionals who have qualified the CISCO CCNA certification exam.

The CCNA training covers all aspects of the 200-125 curriculum in detail. The course also provides practical hands-on training on Cisco Routers and Cisco Switches, as no WAN setup is complete without Leased line / Wireless / VSAT / DSL etc. Telecom devices like CSU/DSU, Telco MUX, are also covered in the Practical setup. The training for CCNA Certification is provided by Senior Network/WAN engineers who have several years of field experience.

Students preparing for the CCNA certification have a choice of writing the CCNA exam as a single paper or as two papers together. The details of paper codes and their descriptions are mentioned in the table below.

CCNA Exams

Paper 1 200-125 CCNA Interconnecting Cisco Networking Devices: Accelerated (CCNAX) v3.0

Cisco Training - CCNA Course Contents

  • Introduction to Wide Area Networks
  • Internetwork Operating System (IOS)
  • IP Routing (Static & Dynamic)
  • LAN Switching
  • IPv4 & IPv6
  • STP, PVSTP & RSTP
  • Virtual Private Network - VPN
  • Redundancy Protocols
  • Network monitoring tools
  • NAT & PAT
  • Cisco Express Forwarding
  • Network Device Security
  • WAN Technologies (Cloud, SDN, IoT)
  • Troubleshooting

Cisco Training - CCNA v3 Course Details

Network Fundamentals

  • Compare & contrast OSI & TCP/IP models
  • Compare & contrast TCP & UDP protocols
  • Impact of infrastructure components in a network
    • Firewalls, Access points, Wireless controllers
  • Effects of cloud resources on network architecture
    • Traffic path to internal and external cloud services
    • Virtual services
    • Basic virtual network infrastructure
  • Compare & contrast collapsed core and three-tier architecture
  • Compare & contrast network topologies
    • Star, Mesh, Hybrid
  • Select the appropriate cabling type (Straight & Cross)
  • Apply troubleshooting methodologies to resolve problems
    • Perform and document fault isolation
    • Resolve or escalate
    • Verify & monitor resolution
  • Configure, verify & troubleshoot IPv4 addressing & subnetting
  • Compare & contrast IPv4 address types
    • Unicast, Broadcast, Multicast
  • Describe the need for private IPv4 addressing
  • Identify IPv6 addressing to use in LAN/WAN environment
  • Configure, verify & troubleshoot IPv6 addressing
  • Configure & verify IPv6 Stateless Address Auto Configuration
  • Compare & contrast IPv6 address types
    Global unicast, Unique local, Link local, Multicast, Modified EUI 64, Autoconfiguration, Anycast

LAN Switching Technologies

  • Describe & verify switching concepts
    • MAC learning & aging, Frame switching, Frame flooding, MAC address table
  • Interpret Ethernet frame format
  • Troubleshoot interface & cable issues (collisions, errors, duplex, speed)
  • Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
    • Access ports (data & voice), Default VLAN
  • Configure, verify, and troubleshoot interswitch connectivity
    • Trunk ports, Add & remove VLANs on a trunk
    • DTP, VTP (v1&v2), and 802.1Q Native VLAN
  • Configure, verify, & troubleshoot STP protocols
    • STP mode (PVST+ and RPVST+), STP root bridge selection
  • Configure, verify & troubleshoot STP related optional features
    • PortFast, BPDU guard
  • Configure & verify Layer 2 protocols
    • Cisco Discovery Protocol, LLDP
  • Configure, verify, & troubleshoot (Layer 2/Layer 3) EtherChannel
    • Static, PAGP, LACP
  • Describe the benefits of switch stacking & chassis aggregation

Routing Technologies

  • Describe the routing concepts
    • Packet handling along the path through a network
    • Forwarding decision based on route lookup
    • Frame rewrite
  • Interpret the components of a routing table
    • Prefix, Network mask, Next hop, Routing protocol code
    • Administrative distance, Metric
    • Gateway of last resort & Admin distance
  • Configure, verify, & troubleshoot inter-VLAN routing
    • Router on a stick & SVI
  • Compare & contrast static routing & dynamic routing
  • Compare & contrast distance vector and link state routing protocols
  • Compare & contrast interior and exterior routing protocols
  • Configure, verify & troubleshoot IPv4 and IPv6 static routing
    • Default route, Network route, Host route, Floating static
  • Configure, verify & troubleshoot single area & multi-area OSPFv2 for IPv4 & IPv6
    (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
  • Configure, verify & troubleshoot EIGRP for IPv4 & IPv6
    (excluding authentication, filtering, manual summarization, redistribution, stub)
  • Configure, verify, and troubleshoot RIPv2 for IPv4
    (excluding authentication, filtering, manual summarization, redistribution)
  • Troubleshoot basic Layer 3 end-to-end connectivity issues

WAN Technologies

  • Configure & verify PPP and MLPPP on WAN interfaces using local authentication
  • Configure, verify, & troubleshoot PPPoE client-side interfaces using local authentication
  • Configure, verify, & troubleshoot GRE tunnel connectivity
  • Describe WAN topology options
    • Point-to-point, Hub and spoke, Full mesh, Single vs dual-homed
  • Describe WAN access connectivity options
    • MPLS, Metro Ethernet, Broadband PPPoE, Internet VPN (DMVPN, site-to-site VPN, client VPN)
  • Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)
  • Describe basic QoS concepts
    • Marking, Device trust, Prioritization, (Voice, Video & Data)
    • Shaping, Policing, Congestion management

Infrastructure Services

  • Describe DNS lookup operation
  • Troubleshoot client connectivity issues involving DNS
  • Configure and verify DHCP on a router (excluding static reservations)
    • Server, Relay, Client, TFTP, DNS, & gateway options
  • Troubleshoot client- and router-based DHCP connectivity issues
  • Configure, verify, and troubleshoot basic HSRP
    • Priority, Pre-emption, Version
  • Describe common access layer threat mitigation techniques
    • Using CDP or LLDP for device discovery
    • Licensing, Logging, Time zone & Loopback
  • Configure and verify initial device configuration
  • Perform device maintenance

CISCO Security Course details in PDF

This course provides you with the fundamentals of security implementation on Cisco devices. You will learn how to implement network security, recognize threats and discover vulnerabilities in networks. Practical exposure will be given on security implementation for Cisco routers and Cisco switches. The training will be provided by Senior Network / WAN / Security Engineers with several years of field experience.

Implementing Security on Cisco Routers

  • Securing the Router for Administrative Access
    • Basic Router configuration
    • Control Administrative Access to Routers
    • Configuring Cisco Router using Cisco Configuration Professional (CCP)
    • SSH configuration
    • Configure Administrative Roles
      • Privilege
      • Role based CLI (VIEWS)
    • Configure IOS Resilience and Management Reporting
    • Configure Automated Security Features
    • Understanding, implementing, and verifying AAA (authentication, authorization, and accounting), including the details of TACACS+ and RADIUS
    • Securing Administrative Access Using AAA and RADIUS
      • Configure Local Authentication
      • Configure Local Authentication Using AAA
      • Configure Centralized Authentication Using AAA and RADIUS
      • Password Recovery on Cisco Routers

    Implementing Security on Cisco Switches

    • Understanding and implementing protection against Layer 2 attacks, including CAM table overflow attacks, and VLAN hopping
      • Providing Layer 2 Security by implementing VLANs
      • Secure Trunks and Access Ports
      • BPDU Guard, Port Security
      • Configure SPAN and Monitor Traffic

    Cisco IOS firewall

    • Default Routing
    • Implement Network Address Translation (NAT) and Port Address Translation (PAT)
    • Implementing Access Control List in IPv4 & IPv6
    • Standard, extended, and named access control lists used for packet filtering and for the classification of traffic

    Cisco IOS VPN

    • Understanding VPN
    • Types of VPN -Site to Site, Remote Access, SSL
    • Configure a Site-to-Site VPN IPsec VPN using CCP

Course Schedule

Duration to complete all the below Courses: 1 Month (3 Weeks + 1 Week)

Course Duration: 3 Weeks (72 hours including practicals)

Various Date & Time schedule are given as below, any one of Batch / Track can be taken.

Ameerpet, Hyderabad

30th of Every Month

8.30 a.m.

    (IST - GMT +5.30)

30th of Every Month

2.00 p.m.

    (IST - GMT +5.30)

30th of Every Month

7.30 p.m.

    (IST - GMT +5.30)

Banjara Hills, Hyderabad

30th of February, April, June, August, October and December

8:30 a.m.

    (IST - GMT +5.30)

30th of January, March, May, July, September and November

7:30 p.m.

    (IST - GMT +5.30)


  • Practicals / labs for the morning, afternoon and evening batch can be done 2 hours before or after the theory session.
  • If 30th is a Sunday or national holiday the course will start on the next working day.

Faculty: The instructors who execute various training programs including several CCNA training certifications offered by Zoom Technologies are a team of over 250 highly experienced engineers with international exposure and strong experience working in various live, real-time environments and implementations.

Course Duration: 1 Week (26 hours including practicals)

Ameerpet, Hyderabad

23rd of Every Month

8.30 a.m.

    (IST - GMT +5.30)

23rd of Every Month

2.00 p.m.

    (IST - GMT +5.30)

23rd of Every Month

7.30 p.m.

    (IST - GMT +5.30)

Banjara Hills, Hyderabad

23rd of January, March, May, July, September and November

8:30 a.m.

    (IST - GMT +5.30)

23rd of February, April, June, August, October and December

7:30 p.m.

    (IST - GMT +5.30)


  • Practicals / labs for the morning, afternoon and evening batch can be done 2 hours before or after the theory session.
  • If 23rd is a Sunday or national holiday the course will start on the next working day.

Faculty: The instructors who execute various training programs including several CCNA training certifications offered by Zoom Technologies are a team of over 250 highly experienced engineers with international exposure and strong experience working in various live, real-time environments and implementations.

The classroom session will be streamed online on Webex for the virtual classroom subscribers. The instructor will be simultaneously teaching a physical and virtual classroom. After the session ends, the instructor will take questions from the virtual classroom students and clarify any doubts.

30th of Every Month

8.30 a.m.

    (IST - GMT +5.30)

30th of Every Month

2.00 p.m.

    (IST - GMT +5.30)

30th of Every Month

7.30 p.m.

    (IST - GMT +5.30)

* All prices are subject to a 18% Goods and Service Tax Charge. For online Credit / Debit Card payment, surcharge 5.75% is charged to the Course fee. Rate quoted in U.S. dollars subject to change according to Foreign Exchange rates.

  • If 30th is a Sunday or national holiday the course will start on the next working day.

Faculty: The instructors who execute various training programs including several CCNA training certifications offered by Zoom Technologies are a team of over 250 highly experienced engineers with international exposure and strong experience working in various live, real-time environments and implementations.

Our Special Offers
Exclusive Premium Packages for Classroom Training Only

MCSE + Linux Package
INR. 5,500 / USD 80
CCNA + CISCO Security
INR. 5,500 / USD 80

Copyright © 1996 - 2019 ZOOM Technologies. All Rights Reserved.